User`s guide

Receive Alignment

Menu (Portables

Only)

From the MAIN MENU, press F2 and then F3 to access this screen.

This screen is accessible for UHF and VHF Portable models only. Standard

periodic receiver alignment procedures are performed from this menu.

Refer to your Radio Service Manual for Receive Alignment procedures.

Function Key Descriptions

F2 - FRONT END FILT ALIGN

(Front-End Filter Alignment)

This screen is accessible for Portable models only. Brings up the FRONT

END FILTER ALIGNMENT screen. Refer to your Radio Service Manual

for detailed Front-End Filter Alignment procedures. These procedures

should be attempted only by qualiﬁed service personnel.

F3 - RX VCO XOVER

(Receiver VCO Crossover)

This screen is accessible for Portable models only. Brings up the RECEIVE

VCO CROSSOVER screen. Refer to your Radio Service Manual for

detailed Receiver VCO Crossover procedures. These procedures should

be attempted only by qualiﬁed service personnel.

MOTOROLA Radio Service Software Select Function F1 - F10.

ASTRO Model:

MAIN:SERVICE:RX ALIGN

RECEIVER ALIGNMENT MENU

-----------------------

F1 - HELP

F2 - Front End Bandpass Filter

F3 - Rx VCO Crossover Frequency

F4 -

F5 -

F6 -

F7 -

F8 -

F9 -

F10 - EXIT, Return to Service Menu

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10

HELP FRONT END RX VCO EXIT

FILT ALGN XOVER

Caution

This procedure should be attempted only by qualiﬁed

service personnel. Failure to perform alignment

procedures properly may result in seriously degraded

radio or system performance.