User`s guide

62
Controller Board
Initialization
From the MAIN MENU, press F2 then F9 to access the CONTROLLER
BOARD INITIALIZATION screen.
This screen is only accessible if there is a CBI radio attached to the RIB .
Field Definitions
Serial Number Enter the Serial Number of the Target radio. This number can be found
on the outside casing of the radio. You will not be able to initialize the
CBI radio unless you enter a proper Serial Number. Once the radio is
programmed with this serial number, you will not be able to change it.
Model Number This is the Model Number of the radio attached to the RIB.
Note: This field is read directly from the radio and cannot be
edited.
FLASHcode This is the FLASHcode of the radio attached to the RIB.
Note: This field is read directly from the radio and cannot be
edited by the user.
BI
MOTOROLA Radio Service Software Enter Serial Number.
ASTRO Model:
MAIN:SERVICE:CBI
Controller Board Initialization
-------------------------------
Serial Number....123ABC1234
Model Number...D04UJH9PW3AN
FLASHcode...000000-000000-0
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PROGRAM EXIT
RADIO
!
Caution
Do not turn off the radio or disconnect it from the
computer while attempting to Program the codeplug.
Interrupting the programming process will destroy
the codeplug contents and completely Disable the
radio!