User`s guide

59
Service Menu Functions 3
Servicing the Radio
Using the RSS
Now that the hardware and software installation is complete and the
RSS is up and running, you are ready to personalize the radio(s). The
following pages service as a guide to a qualified service technician in
keeping a radio operating at full capability throughout its design life
by means of correct alignments and configurations.
Note: All functions (supported and unsupported) will be
displayed in the menu’s working area. The unsupported
functions (based on the radio’s model or options) will NOT be
displayed in the F-key ID area.
Menu Map
Transmit Alignment Menu
B
Reference Oscillator
Transmit Power
Transmit Deviation Balance (Compensation)
C
E
B
B
C
D
F
C
Transmit Deviation Limit
Transmit VCO Crossover Frequency (Portables Only)
Receiver Alignment Menu (Portables Only)
Front End Bandpass Filter (Portables Only)
Rx VCO Crossover Frequency (Portables Only)
SERVICE
(or)
Transmit Current Limit (Mobiles Only)
I
Controller Board Initialization