User`s guide

54
Create a Talkgroup Scan
with One List
Now that the Zone/Channel features are programmed, fill in the Scan
List as follows:
1. From the CHANGE/VIEW MENU, press F3 to access the RADIO
WIDE CONFIGURATION MENU.
2. From the RADIO WIDE CONFIGURATION MENU, press F5 to
bring up the SCAN LIST screen. If “1” is not already displayed for
Scan List number, press F3 to see previous list. If “1” is displayed,
proceed.
3. If Scan Type is not already highlighted, press Tab to advance the
prompt to Scan Type field.
4. Use the UP/DOWN arrow keys to select Talkgroup Scan Type.
5. Press Tab to advance the prompt to the Zn field of Scan List
Member # 1.
6. Press the UP/DOWN arrow keys to select desired zone or enter the
desired zone number directly.
7. Press Tab to advance the prompt to the Chn field.
8. Use the UP/DOWN arrow keys to select desired channel or enter
channel number.
Repeat steps 5 through 7 until desired channels are entered. If you
have created more than one Scan List, repeat the entire sequence
described above for each scan list.
9. Press F10 twice to exit to the CHANGE/VIEW MENU.
Program the Phone List Now go on to program the Phone List as follows:
1. Press F4 at the CHANGE/VIEW MENU to bring up the TRUNKING
MENU.
2. Press F4 to bring up the TRUNKING PERSONALITY screen.
3. Press Tab to advance the prompt to Phone Interconnect field.
4. Use the UP/DOWN arrow keys to select Unlimited or List Only.
5. Press Tab to advance the prompt to the Scan List field.
6. Use the UP/DOWN arrow keys to select a Scan List that can be
used for this personality.
7. Press F4 to access the next personality.
Repeat steps 5 through 7 for each additional personality and each
additional Scan List.
8. Press F10 twice to access the CHANGE/VIEW MENU.
9. At the CHANGE/VIEW MENU, press F3 to bring up the RADIO
WIDE CONFIGURATION MENU.
10. Press F4 at the RADIO WIDE CONFIGURATION MENU to bring
up the PHONE CONFIGURATION screen.
11.Press Tab to advance the prompt to Phone Num Display Format
field.