User`s guide

46
5. Assign personalities to switch positions on the ZONE/CHANNEL
ASSIGNMENT screen (F4/F8).
6. Fill in the scan list with desired zone/channel entries.
7. Program the radio.
Step-by-Step
Programming
Instructions
The directions below and the button/switch/menu item defaults listed
below for each model are designed to guide you in programming a ba-
sic ASTRO Trunked Radio. Use the sample chart for a Trunked radio on
the following page to record the features that you wish to program
into your radio. Refer to Appendix E for a blank form you can use for
Trunked radio programming in future.
ASTRO SABER I Radio
Button/Switch/Menu
Item Defaults
The ASTRO SABER radio’s button/switch/menu item defaults are
provided below for your reference:
ASTRO XTS 3000 I Radio
Button/Switch/Menu
Item Defaults
The ASTRO XTS 3000 radio’s button/switch/menu item defaults are
provided below for your reference:
ITEM H35 H37 H38
Top Button Emergency Emergency Emergency
16-Position Rotary Channel Select Channel Select Channel Select
Side Button 1 (Top) Monitor Unprogrammed Call Response
Side Button 2 Scan Scan Scan
Side Button 3 Talkaround/
Direct
Private Call Site Display/
Search
Two-Position
Concentric Switch
Zone Select Zone Select Zone Select
Concentric Rocker
Switch
Blank Blank Blank
ITEM H35 H37 H38
Orange (Top) Button Emergency Emergency Emergency
16-Position Rotary Channel Select Channel Select Channel Select
Side Button 1 (Top) Monitor Unprogrammed Call Response
Side Button 2 Scan Scan Scan
Side Button 3 Talkaround/
Direct
Private Call Site Display/Search
Two-Position
Concentric Switch
Blank Blank Blank
Three-Position Toggle Zone Select Zone Select Zone Select