User`s guide

43
10. Press Tab to advance the prompt to the Transmit Squelch Type
field. Use the UP/DOWN arrow keys to select PL, DPL, or Disabled.
11. If your selection for Squelch Type is PL or DPL, press Tab to
advance the prompt to the Code field. Use the UP/DOWN arrow
keys to scroll for choices, or type in the code directly.
12. Press Tab to advance the prompt to the Signalling Type field and
select “MDC” or “None”.
13. Press Tab to advance the prompt to the Tx Voice/Signal Type field.
Press the UP/DOWN arrow keys to select ASTRO or Non-ASTRO. If
the Rx Voice/Signal Type is Non-ASTRO, skip to step 17.
14. Press F9 and then F6 to access the ASTRO OPTIONS screen. Press
Tab to advance the prompt to the Rx Network ID field. Using the
UP/DOWN arrow keys or keyboard numbers, and enter the desired
Rx Network ID.
15.Press Tab to access the Tx Network ID field and enter the desired
ID.
16. Press F10 twice to return to the CONVENTIONAL PERSONALITY
screen. Press F4 to advance to the next personality.
17. Repeat steps 3 through 16 for additional personalities.
Program Zone/Channel
Features
Now that the personalities are programmed, follow the steps below to
assign the personalities to switch positions in the ZONE/CHANNEL
ASSIGNMENT screen. The channels in a zone should be grouped in
some logical way, such as by geographical area or work group.
1. Press Esc to return to the MAIN MENU. Press F4 to access the
CHANGE/VIEW MENU. Press F8 to bring up the ZONE/
TALKGROUP (CHANNEL) ASSIGNMENT screen.
2. Add the desired number of channels by pressing F6 and the F2 to
insert after the current entry or F3 to add to the end of the list.
Repeat this step as many times as necessary.
3. Press the Pg Dn key to advance to Page 1.
4. Press Tab to advance the prompt to the Zone Name field.
5. Type a name up to three characters in length.
NOTE: The character field may be changed to accommodate a
maximum of 14 characters for ASTRO SABER and 12 characters
for XTS3000, from the DISPLAY OPTION screen (F4/F3/F6).
6. Press Tab to advance the prompt to the Channel Name field.
7. Type the name of channel that you desire. The name can be up to
11 characters for ASTRO SABER and 12 characters for XTS3000 in
length.
NOTE: The character field can be modified to accommodate a
maximum of 14 characters for ASTRO SABER, 12 for XTS3000,
from the DISPLAY OPTIONS screen (F4/F3/F6).
8. Press Tab to advance the prompt to the Personality Number field.
Type the desired personality number or use the UP/DOWN arrow
keys to make your selection.