User`s guide

320
MDC
CONFIGURATION
PRINT MENU
At the MAIN MENU, press F5, F6 then F4 to access the MDC PRINT
MENU.
You must first read or get a codeplug using the GET/SAVE functions in order
to print radio configuration data. The PRINT function is used to produce
permanent records of codeplug configurations. A printer is required
and should be connected to your computer according to instructions
in the user’s manual that came with your computer. Graphics
capability is NOT required.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out.
Note: When printing, misalignment of page breaks may result if the
printer is not set up properly. For best results, configure the printer
as an IBM ProPrinter or an Epson FX/MX having factory default
settings. The default number of lines per page is 66.
Function Key Descriptions
F3 - SYSTEM DATA Print MDC Systems information.
F4 - CALL LIST Prints a summary of the MDC Call List.
F5 - REPEATER ID LIST Prints a summary of the MDC Repeater Access Codes.
EFD
MOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN:PRINT:CONV:MDC
MDC CONFIGURATION PRINT MENU
----------------------------
F1 - HELP
F2 -
F3 - MDC Systems
F4 - MDC Call List Data
F5 - MDC Repeater ID List
F6 -
F7 -
F8 -
F9 -
F10 - EXIT, Return to PRINT MENU
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP SYSTEM CALL REPEATER EXIT
DATA LIST ID LIST