User`s guide

311
Field Definitions
Zone Number Use the UP/DOWN arrow keys to select the desired zone. The number
may also be entered directly.
Zone Name Each zone may be assigned an alphanumeric name. The number of
characters allotted for the zone name versus the channel name is
defined on the RADIO WIDE DISPLAY OPTIONS screen (F4/F3/F6).
The zone name will appear to the left of the channel name on the
radio display.
Channel Number This is a read-only field. A channel number refers to the position in the
list which a particular member occupies. Depending on the radio
model and configuration, channel selection may be made via the
rotary switch, the toggle switch, or the keypad (if applicable).
Channel Name Each channel may be assigned an alphanumeric name. The number of
characters allotted for the channel name versus the zone name is
defined on the RADIO WIDE DISPLAY OPTIONS screen (F4/F3/F6).
The channel name will appear to the right of the zone name on the
radio display.
Personality Type Use the UP/DOWN arrow keys to select either a Conventional or
Trunked personality for each zone member. Both types may be
assigned within a single zone.
Note: Personalities must be defined before they can be assigned on
this screen. Trunking personalities are entered on the TRUNKING
PERSONALITY screen (F4/F4/F4), and Conventional
personalities are entered on the CONVENTIONAL
PERSONALITY screen (F4/F6/F3).
Personality Number Use the UP/DOWN arrow keys to select the personality number for
this channel. The number may also be entered directly.
Talkgroup Number Use the UP/DOWN arrow keys to select the Trunking Talkgroup (or
Subfleet) ID for the current channel in the list. The ID will be displayed
in hexadecimal. Select ATG for Announcement Group, FLT for
fleetwide., or DYN for a Dynamic Regrouping position.
Note: Personalities must be defined before they can be assigned on
this screen. Trunking personalities are entered on the TRUNKING
PERSONALITY screen (F4/F4/F4), and Conventional
personalities are entered on the CONVENTIONAL
PERSONALITY screen (F4/F6/F3).
Note: The Dynamic Regrouping must be enabled on the
TRUNKING SYSTEM screen (F4/F4/F3); Announcement Group
and Fleetwide features must be enabled on the TRUNKING
PERSONALITY screen (F4/F4/F4) in order to be selected as a
talkgroup.