User`s guide

303
MODAT From the MAIN MENU, press F4 and then F6 twice to access this
screen.
This screen cannot be accessed if the MODAT software option was not
purchased for the radio. This screen allows you to view and edit radio
MODAT options. Press Tab to select the desired field, or press the
desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Field Definitions
Unit ID (decimal) Use the UP/DOWN arrow keys to make your selection or enter a four-
digit decimal of the subscriber directly. The thousands digit must be to
the left and the one’s digit to the right. The valid range is 0000 to 8999.
Pretime (ms) Use the UP/DOWN arrow keys to make your selection or enter a
decimal value directly. Pretime is the time delay allowed for the system
to activate prior to every transmission. During this interval, an
unmodulated carrier is transmitted. Valid values range of 10 to 2550
ms in 10-ms increments.
Revert Channel Table The Emergency Revert Channel table contains the channels (pointed
to in the Conventional personalities) to which the radio reverts when
entering Emergency call mode. Enter the zone numbers and the
channel numbers in the table. Each MODAT personality will select one
of these channels or may choose itself.
First, create the necessary personalities. Then go to the ZONE/
CHANNEL ASSIGNMENT screen (F4/F8), and enter channel
information. You will then be able to set the MODAT emergency
channels.
Note: Emergency revert channels cannot be Receive Only channels.
DFF
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO Model:
MAIN:CHANGE/VIEW:CONV:MODAT
MODAT
-----
Unit ID (decimal)...............0
Pretime (ms)..................300
Revert Table
------------
Num Zone Channel
--- ---- -------
1 1 1
2 1 1
3 1 1
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT