User`s guide

299
ASTRO Data
Peripheral (Mobiles
Only)
From the MAIN MENU, press F4, F6 and then F5 twice to access this
screen.
Mobiles Only
This screen is only available if the Data Peripheral Capable Option is added.
This screen allows you to view and edit ASTRO Mobile Data Peripheral
options. Press Tab to select the desired field, or press the desired
function key (F1 - F10). If a field is highlighted, use the UP/DOWN
arrow keys to select the desired choice or value.
Field Definitions
IP Address Use the UP/DOWN arrow keys to select the desired Internet Protocol
(IP) Address of the radio or enter an address directly. This 32-bit
address is only used for Radio Control Protocol traffic between the
Mobile Data Peripheral and the radio. Thus, all radios in a system may
share the same IP address. The IP address may range from
001.001.001.001 to 254.254.254.254.
Baud Rate Use the UP/DOWN arrow keys to select the desired RS232 Baud Rate.
The Baud Rate indicates the rate at which data will travel over the
RS232 port interface. Baud rate is measured in bits per second. This rate
should be set to the rate supported by the attached Mobile Data
Peripheral. Valid baud rates are 1200, 2400 and 9600.
Stop Bits Use the UP/DOWN arrow keys to select the desired number of RS-232
Stop Bits. The Stop Bit data field indicates the number of stop bits per
character over the RS-232 interface. Valid values for this field are 1 and
2.
DFEE
MOTOROLA Radio Service Software Enter or Scroll to Select Value.
ASTRO MOBILE Model:
MAIN:CHANGE/VIEW:CONV:ASTRO:DATA PER
ASTRO DATA PERIPHERAL
---------------------
IP Address 254.254.254.254
Baud Rate...............9600
Stop Bits..................1
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT