User`s guide

296
Remote Radio Mode This field will be visible for view-only on Mobile radios. Use the UP/DOWN
arrow keys to select the ASTRO Remote Radio Mode feature from
among the following:
For each ASTRO Remote Monitor/Radio Trace command decoded by
the radio, the radio will key up and stay keyed for the time indicated
by the Tx Base Time and the dispatch console value. The dispatch
console value cannot be controlled by the subscriber unit.
Tx Base Time (sec) Use the UP/DOWN arrow keys to select the desired ASTRO Tx Base
Time or enter a value directly. The ASTRO Tx Base Time is a value used
to calculate the period that a radio will key up after receiving an
ASTRO Remote Monitor/Radio Trace command. This Tx Base Time is
multiplied by a second value that is sent from the dispatch console
and transmitted to the radio via an ASTRO Remote Monitor/Radio
Trace command.
The valid range is 10 to 120 seconds in 10-second increments. The
multiplier (second value) may range from 0 (zero) to 6, thus allowing
the radio to have a key up time period ranging from 0 (zero) to 720
seconds.
Radio Trace The radio will automatically key up, sending
unmodulated carrier.
Remote
Monitor
The radio will automatically key up and unmute the
microphones sending voice on the channel.