User`s guide

278
Remote Radio Mode Use the UP/DOWN arrow keys to make your selection. This feature
allows the radio to operate in one of two possible states when it
decodes an MDC Remote Monitor/Radio Trace command:
For each MDC Remote Monitor/Radio Trace command decoded by the
radio, the radio will key up and stay keyed for the time indicated by
the Tx Base Time and the dispatch console value. The dispatch console
value CANNOT be controlled by the subscriber unit.
Tx Base Time (sec) Use the UP/DOWN arrow keys to select the desired MDC Tx Base Time
or enter a value directly. The MDC Tx Base Time is a value used to
calculate the period that a radio will key up after receiving an MDC
Remote Monitor/Radio Trace command. This Tx Base Time is
multiplied by a second value that will be sent from the dispatch
console and transmitted to the radio via an MDC Remote Monitor/
Radio Trace command.
The valid range is 10 to 120 seconds in 10-second increments. The
multiplier (second value) can range from 0 to 6. If effect, the radio can
have a key up time period ranging from 0 (zero) to 720 seconds.
Radio Trace The radio will automatically key up, sending
unmodulated carrier.
Remote
Monitor
The radio will automatically key up and unmute the
microphone thus sending voice on the channel.