User`s guide

26
Main Menu The MAIN MENU is the top level of the program from which all RSS menus
and screens can be accessed.
All selections are made via the function keys, labeled F1 through F10 on the
keyboard. All other menus contain an Esc key, and by pressing it the operator
may at any time return to the MAIN MENU. The user must initially load data
from a radio (or disk) using the GET/SAVE function before being allowed to
CHANGE/VIEW any codeplug data.
Note: For any problems not covered by the Radio Service Software User’s
Manual or the Radio Service Manual, contact your local Motorola field
technical representative.
Function Key Descriptions
F1 - HELP Provides additional information on this screen. Generic help is available
within any help screen in the form of the MORE HELP function.
F2 - SERVICE A multi-level menu that permits access to all radio service alignments through
the service screens. A radio must be connected to the computer via the RIB before
you can access the service screens. All service screens access the codeplug directly.
Therefore, it is NOT necessary to read codeplug data before using the service
screens.
F3 - GET/SAVE Used to read codeplug data from a radio and/or retrieve-archived codeplug
data from a diskette or hard disk for editing purposes using the CHANGE/
VIEW function. The GET/SAVE function is also used to program edited
codeplug data back into the radio or to create an archive file on a diskette or
hard disk.
F4 - CHANGE/VIEW A multi-level menu that is used to change, view, or modify codeplug features
and option configurations. All radio codeplug parameters are classified as
either RADIO WIDE, CONVENTIONAL, TRUNKED, or PERSONALITY-related.
The CHANGE/VIEW menu permits access to each of these categories.
MOTOROLA Radio Service Software Select Function F1 - F10.
ASTRO Model:
MAIN
MAIN MENU
---------
F1 - HELP
F2 - SERVICE: Alignment (Requires RIB)
F3 - GET/SAVE/PROGRAM/CLONE Codeplug Data from/to Disk/Radio
F4 - CHANGE/VIEW Radio Codeplug Data
F5 - PRINT Radio Codeplug Data
F6 - FILE Maintenance
F7 -
F8 - FLASHport Upgrade
F9 - SETUP Computer Configuration
F10 - Exit Radio Service Software, Return to DOS
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP SERVICE GET CHANGE PRINT FILE FLASHport SETUP EXIT
MENU SAVE VIEW DATA MAINT UPGRADE MENU TO DOS