User`s guide

277
MDC System
Remote Options
From the MAIN MENU, press F4, F6, F4, F3 and then F9 twice to access
this screen.
This screen is available only if the radio is Remote Monitor capable. This
screen contains more options for MDC remote systems. Press Tab to
select the desired field, or press the desired function key (F1 - F10). If
a field is highlighted, use the UP/DOWN arrow keys to select the
desired choice or value.
Function Key Descriptions
F3 - PREV SYS Accesses the previous system.
F4 - NEXT SYS Accesses the next system.
Field Definitions
MDC System Use the UP/DOWN arrow keys to access a different MDC system, or
directly enter the number of the system. The F3/F4 function keys can
also be used to move between systems.
Remote Mon/Radio Trace Use the UP/DOWN arrow keys to enable/disable the MDC Remote
Monitor/Radio Trace feature. If the MDC Remote Monitor/Radio Trace
feature is enabled, the radio will be able to decode an MDC Remote
Monitor or Radio Trace command sent from the dispatch console.
After decoding this command, the radio will key up its transmitter for
a time period calculated using the Tx Base Time and another value
embedded within the Remote Monitor/Radio Trace command.
DFDC
II
MOTOROLA Radio Service Software Enter or Scroll to Select Value.
ASTRO Model:
...MDC:SYSTEMS:OPTIONS:REM OPTIONS
MDC System.........1
MDC SYSTEM REMOTE OPTIONS
-------------------------
Remote Mon/Radio Trace.....Enabled
Remote Radio Mode.....Radio Trace
Tx Base Time (sec)............ 10
Rx Base Time (sec).............10
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PREV NEXT EXIT
SYS SYS