User`s guide

270
MDC Systems From the MAIN MENU, press F4, F6, F4 and then F3 to access this
screen.
This screen allows you to change or view parameters that pertain to an
MDC system. The settings shown on the screen are only for the system
shown. Press Tab to select the desired field, or press the desired
function key (F1 - F10). If a field is highlighted, use the UP/DOWN
arrow keys to select the desired choice or value.
Function Key Descriptions
F2 - ADD SYS Adds a system.
F3 - PREV SYS Accesses the previous system.
F4 - NEXT SYS Accesses the next system.
F5 - DELETE SYS Deletes the selected MDC system. You will be prompted for
confirmation before the system is actually deleted.
F9 - MORE OPTIONS Allows you to change or view additional MDC system field parameters.
DFDC
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO Model:
MAIN:CHANGE/VIEW:CONV:MDC:SYSTEMS
MDC System.........1
MDC SYSTEMS
-----------
Primary ID...................0001 Emergency.................Enabled
Secondary ID.............00000000 Emergency Type.....Alarm and Call
Variable ID...................000 Emer PTT ID Sidetone....Disabled
Leading PTT-ID............Enabled Acknowledge Alert Tone...Enabled
PTT-ID Sidetone.........Disabled
Trailing PTT-ID..........Disabled Revert Table
Radio Check..............Disabled ------------
Radio Inhibit............Disabled Num Zone Channel
Status....................Enabled --- ---- -------
Status Request...........Disabled 1 1 1
Message..................Disabled 2 1 1
3 1 1
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE MORE EXIT
SYS SYS SYS SYS OPTIONS