User`s guide

268
Access Type This field will be visible only if the Repeater Access field is set to Enabled.
Use the UP/DOWN arrow keys to select the Repeater Access Type. Valid
choices are:
RAB 1 Code Type This field will be visible only if the Repeater Access field is set to Enabled and
the Access Type field is set to Manual. Use the UP/DOWN arrow keys to
select the type of Repeater Access Button operation. Depending on your
radio capabilities, choices will be Singletone, DTMF or MDC.
RAB 1 Singletone (Hz)/RAB 1
MDC Repeater ID
This field will be visible only if the Repeater Access field is set to Enabled and
the Access Type field is set to Manual. For Singletone and MDC, enter the
index from the Singletone List or the MDC Repeater ID List. For DTMF,
enter the tone value; DTMF Tone values are 0 (zero) through 9, “*” and
“#”. Alternatively, the UP/DOWN arrow keys could be used to scroll
through indexes/values.
RAB 2 Code Type This field will be visible only if the Repeater Access field is set to Enabled and
the Access Type field is set to Manual. Use the UP/DOWN arrow keys to
select the type of Repeater Access Button operation. Depending on your
radio capabilities, choices will be Singletone, DTMF, MDC or None.
Auto The RAC code word is transmitted prior to every
transmission.
Manual The code word is transmitted with each push of the RAB
button.