User`s guide

260
Rx Unmute Rule Use the UP/DOWN arrow keys to select Rx Unmute Rule. The choices
are:
[1] For radios equipped with VSELP (Vector Sum Exited Linear
Prediction) operation, the Talkgroup ID match is the Talkgroup
ID associated with the selected ASTRO system. For the radio to
unmute on a Selective Call, Selective Call Decode must be
enabled.
[2] For radios equipped with CAI (Common Air Interface)
operation, for this option to be available, Talkgroup must be
enabled or Selective Call Decode must be enabled. If Talkgroup
is enabled, the Talkgroup ID is the selected value on the ASTRO
CONV TALKGTROUP OPTIONS Screen (F4/F6/F3/F9/F6/F6).
See the further Note below. For the radio to unmute on a
Selective Call, Selective Call Decoder must be enabled.
[3] For this option to be available, Selective Call Decode must be
enabled.
[4] For this option to be available, the radio must be equipped with
CAI Digital Operation.
[5] When this option is selected, the Rx Network ID, Tx Network
ID, and Direct Network ID fields will be set to 293 and will
remain fixed at that value.
Note: For radios equipped with CAI Digital Operation, when
transmitting on the System Wide Talkgroup (ID 65535), the
radio will automatically receive on Normal Squelch regardless of
the setting of this field.
Emergency Revert This field is visible if the Tx Signal Type in the Conventional Personality
screen F4/F6/F3 is set to ASTRO. Use the UP/DOWN arrow keys to select
the Emergency transmit channel. The choices are Selected Channel or
Channel #1, #2, or #3. Selected Channel will cause the emergency
transmission to always be broadcast on the current personality.
However, the emergency transmission can also be reverted to another
personality. Each ASTRO System also contains a table of three
emergency revert channels, which are configured on the ASTRO
SYSTEM screen (F4/F6/F5/F3). Channels #1, #2, and #3 refer to that
table.
Normal Squelch The radio will unmute upon decoding a Network ID
match.
Selective Squelch The radio will unmute upon decoding a Network ID
match and either a Talkgroup ID match or a
Selective Call. [1] [2].
Data and Squelch The radio will unmute upon decoding a Network ID
match and Selective Call. [3].
Digital CSQ The radio will unmute to all CAI compliant digital
voice signals. [4] [5].