User`s guide
252
Conventional
Personality Phone
Options
From the MAIN MENU, press F4, F6, F3 and then F8 to access this
screen.
This screen allows the user to edit the Conventional phone
configuration for each Conventional personality. Press Tab to select
the desired field, or press the desired function key (F1 - F10). If a field
is highlighted, use the UP/DOWN arrow keys to select the desired
choice or value.
Field Definitions
Personality This is a view-only field.
Note: Refer to the Motorola Radio Catalog Sheets for the
maximum number of personalities allowed for this model.
Auto Access Code Select Use the UP/DOWN arrow keys to select an Auto Access Code for this
personality. The radio contains a table for DTMF Access and Deaccess
code pairs and the personality points to one of the table entries. The
actual four-digit codes are entered on the ACCESS/DEACCESS CODES
screen (F4/F3/F4/F8).
DTMF Access Timing Table Use the UP/DOWN arrow keys to select the set of DTMF timing
parameters for this personality. Timing can be changed for Initial
Delay, Digit Duration and Interdigit Delay. The radio contains a table
with four sets of values for each of these parameters. The actual
parameters are entered on the PHONE CONFIGURATION screen (F4/
F3/F4/F9).
Initial Delay (ms) This a view-only field. The value shown here depends on the DTMF
Access Timing Table chosen.
Digit Duration (ms) This a view-only field. The value shown here depends on the DTMF
Access Timing Table chosen.
Interdigit Delay (ms) This a view-only field. The value shown here depends on the DTMF
Access Timing Table chosen.
DFCH
MOTOROLA Radio Service Software Enter or Scroll to Select
ASTRO Model: Personality.
MAIN:CHANGE/VIEW:CONV:PERS:PHONE
Personality... 1
CONVENTIONAL PERSONALITY PHONE OPTIONS
--------------------------------------
Auto Access Code Select..........1 -*1P#
DTMF Access Timing Table...............1
Initial Delay (ms)................1000
Digit Duration (ms)................125
Interdigit Delay (ms)..................75
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT