User`s guide

251
Call Alert Encode Use the UP/DOWN arrow keys to enable/disable Call Alert Encode. If
this feature is enabled, the user will be able to send pages to other
radios.
Note: If this feature is enabled and the selection of target radio(s) IDs
via Call List is to be made available to the user, data must be
programmed into the appropriate Call List table.
Selective Call Decode Use the UP/DOWN arrow keys to enable/disable the MDC Selective
Call Decode feature for this personality. If this feature is enabled, the
user can receive individual as well as group calls. It is intended to
eliminate annoyance to users when they receive traffic that does not
pertain to them.
Unmute Type This field will be visible only if the Select Call Decode field on this screen is
set to Enabled. Use the UP/DOWN arrow keys to select the muting type
from among the following:
Selective Call Encode Use the UP/DOWN arrow keys to enable the MDC Selective Call
Encode feature for this personality. If this feature is enabled, the user
can send calls to an individual radio or to a group of radios. It is
intended to eliminate annoyance to users when they receive traffic
that does not pertain to them.
Auto Sel Call Transmit This field will be visible only if the Selective Call Encode field is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable the Auto
Selective Call Transmit option. If this option is enabled, the radio will
remain in Selective Call mode after the PTT switch is released. If not,
it will exit Selective Call mode as soon as the PTT switch is released.
MDC Unlimited Calling This field will be visible only if the Call Alert Encode field or the Selective
Call Encode field is set to Enabled. Use the UP/DOWN arrow keys to
enable/disable Unlimited Calling. If this option is enabled, the user
will be able to directly enter from the keypad IDs of radios he or she
wants to call. Target Radio ID selection via the programmed Call List
instead is still a valid option available for models so equipped.
Note: To be able to take advantage of this feature, a radio must be
equipped with a numeric keypad. This option affects only the Call
Alert Encode and Selective Call Encode features.
Tx Inhibit On Busy Use the UP/DOWN arrow keys to enable/disable the MDC Transmit
Inhibit on Busy Channel option for this personality. When this option
is enabled, polite MDC transmissions will be inhibited when a carrier
is present on the channel.
And Radio must receive both the Selective Call code (or Quik-
Call II tones) and the proper code (PL/DPL and/or Secure)
before it will unmute.
Or Radio will unmute on proper code (PL/DPL and/or
Secure) or on carrier after the Selective Call code (or
Quik-Call II tone) is decoded.