User`s guide

244
Revert Use the UP/DOWN arrow keys to select the Emergency transmit
channel. The choices are Selected Channel, or Channel 1, 2, or 3.
Selected Channel will cause the emergency transmission to always be
broadcast on the current personality. However, the emergency
transmission can also be reverted to another personality. Each MDC
System also contains a table of three emergency revert channels which
are configured on the MDC SYSTEM screen ( F4/F6/F4/F3 ). Channels
1, 2, and 3 refer to that table.
Note: Receive-only personalities must always revert.
Rx Voice/Signal Type Use UP/DOWN arrow keys to select one of the following:
Note: The selection of ASTRO Mode automatically overrides any
previous Personality-type selection made in the Signalling field.
Note: Setting this field to ASTRO and then setting it back to
Non-ASTRO or Mixed Mode will cause the Receive, Transmit,
and Direct Squelch Types to be set to PL regardless of their
current values.
Tx Voice/Signal Type Use UP/DOWN arrows keys to select one of the following:
To prevent Rx-Tx mismatch, this field will not allow you to enter a
different signal type than the type entered in the Rx Voice/Signal Type.
For example, if you selected ASTRO in the Rx Voice/Signal Type field,
you must select ASTRO in this field as well.
Note: Depending on the RSS version in use and/or the capability of
your radio, Phone Operation may be unavailable in ASTRO mode.
Frequency (MHz) The Transmit and Direct Frequency fields will not be visible if the Receive
Only field is set to Enabled. The Direct Frequency field will not be visible if
the Direct/Talkaround field is set to Disabled.
Enter the Receive, Transmit or Direct (Talkaround) frequency directly
in MHz. Alternatively, the UP/DOWN arrow keys may be used to scroll
through the valid channels. Blank receive frequency fields are not allowed.
Note: Refer to the MOTOROLA Catalog Sheets/Price Pages for
valid receive frequencies for this model.
ASTRO
Only ASTRO signals will be received.
Non-ASTRO
Analog signals will be received.
Mixed
Both ASTRO and Analog signals will be received.
ASTRO Only ASTRO signals will be transmitted.
Non-ASTRO Analog signals will be transmitted.