User`s guide

243
Hot Keypad This field will not be visible if the Receive Only field is set to Enabled. Use
the UP/DOWN arrow keys to enable/disable Hot Keypad (DTMF while
transmitting) operation for this personality. When this feature is
enabled, the keypad is live during all dispatch operation. Pressing any
digit 0 (zero) through 9, “*”, or “#” will cause that digit to be
transmitted.
Phone Operation This field will not be visible if the Receive Only field is set to Enabled. Use
the UP/DOWN arrow keys to select the type of phone service for this
personality:
The Phone Options function key will be active only when this field has been
set to a value other than None.
Signalling Use the UP/DOWN arrow keys to enable MDC or other signalling types
provided for this personality.
MDC is a MOTOROLA proprietary, 1200-
baud digital signalling protocol used for unit identification, selective signalling
and emergency features.
The MDC Options function key will be active only when this field has been
set to MDC.
Note: In order to choose MDC options in the RAC OPTIONS
screen ( F4/F6/F3/F9/F7 ), this field must be set to MDC. If this
field is not set to MDC, the only available RAC signalling type will be
Singletone.
MDC System # This field will be visible only if the Signalling field is set to MDC. Use the
UP/DOWN arrow keys to select the MDC system to be used by this
personality.
Note: To add and/or configure MDC systems, access the MDC
Systems screen ( F4/F6/F4/F3 ).
PTT-ID Use the UP/DOWN arrow keys to enable the MDC Unit Identification
feature for this personality. When this feature is enabled, the Unit ID
will be broadcast each time the transmitter is keyed (if the Leading
PTT-ID is enabled) and/or de-keyed (if the Trailing PTT-ID is enabled).
Note: Access the MDC SYSTEMS screen ( F4/F6/F4/F3 ) to specify
when the ID must be transmitted.
Emerg. PTT ID This field is only visible if the MDC Emergency Type was set to Alarm and
Call. Use the UP/DOWN to enable the MDC Emergency PTT ID feature
for this personality. When the Emergency PTT ID is enabled, the radio
Unit ID will be broadcast each time the PTT button is pressed while the
radio is in emergency mode.
The factory default is Disabled.
List Only The user may only call pre-programmed numbers from
the phone list stored in the radio.
Unlimited The user may call phone numbers from the list, or
directly enter any number via the keypad.
None Disables phone operation for this personality.