User`s guide

242
F8 - PHONE OPTIONS This function will be active only when the Phone Operation field has been
set to a value other than None and the radio is Phone capable. Brings up a
screen where you can access the Conventional interconnect access
codes and digit timing parameters for this personality.
F9 - MORE OPTIONS Brings up a screen where you can access additional parameters that can
be used to customize a radio to specific system requirements.
Field Definitions
Personality Use the UP/DOWN arrow keys to select the desired Conventional
Personality. You may also enter the number directly.
Note: Refer to the Motorola Radio Catalog Sheets for the
maximum number of personalities allowed for this model.
Receive Only Use the UP/DOWN arrow keys to enable/disable Receive-only
operation on this personality. If this feature is enabled, all
transmissions including signalling will be inhibited.
Direct/Talkaround This field will not be visible if the Receive Only field is set to Enabled. Use
the UP/DOWN arrow keys to enable Talkaround operation on the
current personality. In Talkaround (or Direct) mode, the radio will
transmit on the receive frequency. This is useful when a Repeater is not
in operation or is out of range.
Talkaround may be used in a manual or automatic mode. For portables ,
talkaround can be set manually through a button ( F4/F3/F3/F2 ), a
switch ( F4/F3/F3/F3 ) or a menu defined on the RADIO WIDE
BUTTON CONFIGURATION screen ( F4/F3/F3/F4 ). The switch may be
either on the top or side of the radio or on the keypad menu (if
applicable). Talkaround for Mobiles can be set manually only through
the buttons ( F4/F3/F3/F2 ).
Note: If talkaround operation is enabled and no button/switch
is assigned, the radio will default to talkaround operation on
this personality.
Time-Out Timer (sec) This field will not be visible if the Receive Only field is set to Enabled. Use
the UP/DOWN arrow keys to select the Time-Out Timer (TOT) for this
personality. Time-Out Timer determines the amount of time the radio
can continuously transmit before it must be de-keyed. When the Time-
Out Timer is about to expire, the radio beeps and then stops
transmitting.
Each personality may have one of four different TOT values. The range
is 15 to 465 in 15 second increments and the value Infinite (that is,
Time-Out Timer disabled). The four values for the radio can be
changed on the RADIO WIDE OPTIONS screen ( F4/F3/F2/F9 ).
Scan List Use the UP/DOWN arrow keys to select the Scan List to be used for this
personality. To change or view the scan list, access the SCAN LIST
screen ( F4/F3/F5 ). Conventional personalities may use Conventional
or Talkgroup type scan lists.