User`s guide
241
Conventional
Personality
From the MAIN MENU, press
F4
,
F6
and then
F3
to access this screen.
This screen allows the user to edit information for Conventional
operation. Press
Tab
to select the desired field, or press the desired
function key (
F1 - F10
). If a field is highlighted, use the UP/DOWN
arrow keys to select the desired choice or value.
Function Key Descriptions
F2
- ADD PERS
Adds a Conventional personality. Each personality must be
“connected” to a channel on the ZONE/CHANNEL ASSIGNMENT
screen (
F4/F8
).
F3
- PREV PERS
Accesses the previous personality.
F4
- NEXT PERS
Accesses the next personality.
F5
- DELETE PERS
Removes the current Conventional personality. You will be prompted
for confirmation before the personality is deleted.
A minimum of one
Conventional personality must be maintained.
Note:
The only way to recover a deleted personality is to immediately
re-read the radio or the archive file.
However, any other changes
that were made and not previously saved will still be lost.
F6
- SECURE OPTIONS
This function will be active only when a radio equipped with Secure
hardware has been read and the Secure Hardware Equipped field in
F4/F3/
F2
is set to Yes
. Brings up a screen where you can view and edit the
Secure parameters linked to this personality.
F7
- MDC OPTIONS
This function will be active only when a radio with MDC capabilities has
been read and the Signalling Type field is set to MDC. Not all radios have
this capability.
Brings up a screen where you can access the MDC
parameters linked to this personality. Other system-wide MDC
parameters are located on the MDC SYSTEM screen (
F4/F6/F4/F3
).
DFC
MOTOROLA Radio Service Software Enter or Scroll to Select Frequency.
ASTRO Model:
MAIN:CHANGE/VIEW:CONV:PERS
Personality........1 CONVENTIONAL PERSONALITY
------------------------
Signalling.....................MDC
Receive Only..............Disabled MDC System #...................1
Direct / Talkaround........Enabled PTT ID..................Disabled
Time Out Timer..........3- 60 Emerg PTT ID............Disabled
Scan List........................1 Revert..........Selected Channel
Hot Keypad................Disabled Rx Voice/Signal Type.....Non-ASTRO
Phone Operation..........Unlimited Tx Voice/Signal Type.....Non-ASTRO
Receive Transmit Direct
Frequency (MHz) 851.01250 806.05000 851.01250
Squelch Type PL PL PL
Code 67.0 Hz XZ 67.0 Hz XZ 67.0 Hz XZ
DPL Invert
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE SECURE MDC PHONE MORE EXIT
PERS PERS PERS PERS OPTIONS OPTIONS OPTIONS OPTIONS