User`s guide

238
Function Key Descriptions
F2 - CONV WIDE OPT
(Conventional Radio Wide
Options)
Applicable to all Conventional channels and includes options such as
monitor type.
F3 - CONV PERS
(Conventional Personality)
This screen is used to define Conventional frequencies, coded squelch
type (PL/DPL), and Conventional options (phone, scan, etc.) and
signalling (MDC) permitted on each channel.
F4 - MDC CONFIG
(MDC Configuration)
This function will be visible only when a radio with MDC capabilities has
been read. Not all radios have this capability. This screen is used to define
the MDC signalling configuration for each Conventional personality.
Each system can be defined with a unique PTT-ID, emergency
operation and signalling timing options.
F5 - ASTRO CONFIG Brings up a screen where you can define ASTRO system and signalling
configuration and different options that are applicable to ASTRO
radios.
F6 - MODAT This function will be visible only when a radio is MODAT capable (that is,
the MODAT software option has been purchased for the radio. Brings up a
screen where you can define MODAT parameters.
F7 - AUX SYSTEMS
(Auxiliary Systems)
Takes you to a screen where you can define Singletone system
information and Singletone list frequencies.
F8 - MSG ALIAS
(Message Alias)
Brings up a screen where you can change and view the parameters
associated with the MDC/ASTRO System Message Alias.
F9 - STATUS ALIAS Brings up a screen where you can change and view the parameters
associated with the MDC/ASTRO System Status Alias.