User`s guide

225
Field Definitions
Personality Displays the number of the current personality.
Tlk Grp This screen is used to enter subfleets that will use each personality. Use
the F2/F5 keys to add/delete talkgroups. Once the talkgroups are
entered, they are assigned to a Zone/System and a Channel/Subfleet
selector position on the ZONE/CHANNEL ASSIGNMENT screen (F4/
F8). The personality may have up to 16 talkgroups, including an
Announcement Group and or a Dynamic Regrouping talkgroup.
Failsoft Use the UP/DOWN arrow keys to enable/disable Failsoft for this
talkgroup. When the Central Site Controller fails in a Trunked system,
the system goes into Failsoft operation. If the radio is set to Failsoft by
Talkgroup, the radio will use these frequencies to transmit and receive
on.
F/S Frequency Enter the Failsoft Frequency directly in MHz. A transmit and receive
frequency each are required if the system is UHF or VHF.
Strapping This field will be visible only if the radio (or associated codeplug) is Secure-
equipped. This field configures the transmit mode of the talkgroup. If
set to Clear or Secure, the talkgroup is forced to that particular transmit
mode. When set to Select, the user is allowed to choose between Secure
and Clear transmit modes using the radio’s two-position rocker switch.
Tx Voice/Signal Type This field indicates the type of signal (analog or digital) for this
talkgroup.
Key Select Specify the multikey encryption key to be used for the selected
talkgroup.