User`s guide

221
WAC AMSS Failsoft From the MAIN MENU, press F4 thrice and then F6 to access this
screen.
This screen can be accessed only if a System Key is present, the Coverage
Type field on the TRUNKING PERSONALITY screen (F4/F4/F3) and the
Failsoft Type field on the TRUNKING PERSONALITY screen (F4/F4/F4) are
set to WAC AMSS. It is used to enter Failsoft frequencies used by Wide
Area AMSS systems.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Field Definitions
Personality Displays the number of the current personality.
Status Use the UP/DOWN arrow keys to enable/disable Failsoft for the
current Control Channel. If this field is enabled and the Repeater
System fails, the radio will go into Failsoft mode. This means the radio
will act like a conventional talkaround radio, transmitting and
receiving on the same frequency.
Frequency Enter the WAC AMSS frequency for Failsoft operation directly in MHz.
If the radio is set to Failsoft by Talkgroup, it will use these frequencies
to transmit and receive on. Failsoft by Talkgroup is NOT compatible with
WAC AMSS.
Control Channel Enter the Control Channel frequency directly in MHz. Up to eight
frequencies may be specified with WAC AMSS enabled.
DDDF
MOTOROLA Radio Service Software Enter or Scroll to Select Frequency.
ASTRO Model:
...TRUNKING:PERS:WAC FAILSOFT
Personality......1
WAC AMSS FAILSOFT
-----------------
Number Status Frequency Number Control Channel
------ ------ --------- ------ ---------------
1 Enabled 851.01250 1 851.01250
2 Disabled
3 Disabled
4 Disabled
5 Enabled 851.01250
6 Disabled
7 Disabled
8 Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT