User`s guide

218
Time-Out Timer Use the UP/DOWN arrow keys to select the desired Time-Out Timer
(TOT) value for this personality. The TOT determines the amount of
time the radio can continuously transmit before it must be de-keyed.
When the time is about up the radio beeps and then stops
transmitting. Each personality may choose one of four different TOT
values. The four values for the radio can be changed on the RADIO
WIDE OPTIONS MENU (F4/F3/F2/F9).
Private Call Type Use the UP/DOWN arrow keys to select the desired Private Call type
from among the following:
Note: Radio controls may require additional setup for your Private
Call configuration. Refer to the RADIO WIDE BUTTON/SWITCH
CONFIGURATION MENU (F4/F3/F3) help screen for details.
Operation This field will be visible only if the Private Call Type field is set to a value
other than Disabled. If this field is set to Resp Only, the Call ID LIst field on
this screen will NOT be visible. Use the UP/DOWN arrow keys to select
the operation of the Private Call feature for this personality from
among the following:
Call Alert Operation Use the UP/DOWN arrow keys to select Call Alert (Page) operation for
the current personality. Call Alert allows the operator to receive and
transmit pages either by typing in a six-digit decimal ID (Unlimited)
or by selecting one of the IDs in the Trunking Call ID list (List Select).
Note: Radio controls may require additional setup for your Call Alert
configuration. Refer to the RADIO WIDE BUTTON/SWITCH
CONFIGURATION MENU (F4/F3/F3) help screen for details.
PC II Permits calls between fleets and sends an initiator ID so that
the person receiving the call will know who sent it (Type II
and IIi personalities).
Enhanced PC Telephone-like operation.
Disabled Deactivates the Private Call feature for this personality.
Response Only Allows the radio to only accept calls.
List Only Allows the user to make calls from the page list.
Unlimited Requires full keypad. Allows the user to make calls from the
call list and from the keypad, and to modify the Call ID list.
Response Only Allows the radio to accept pages only.
List Only Allows the user to send pages from the page list.
Unlimited Requires full keypad. Allows the user to send pages from the
page list and from the keypad. This also allows the radio user
to modify the page ID list.
Disabled No Call Alert operation is allowed. Disables paging facilities.