User`s guide

208
806 Channel Bandwidth Note: A system or FTR key is required to access this field. Use the
UP/DOWN arrow keys to select the Channel Bandwidth. For the
800 MHz domestic Trunking system configuration, this field is
designated 806 Channel Bandwidth. The value of the field
specifies the Channel Bandwidth of frequencies in the range of
806 MHz to 821 MHz. The bandwidth for the frequencies in the
range 821 MHz to 824MHz are set in the 821 Channel
Bandwidth field. For all Trunked system configurations, this
value specifies the channel bandwidth for that entire system.
Note: 12.5 kHz cannot be selected if the Digital Modulator Type
field on the ASTRO Trunking System Options screen (F4/F4/F3/
F8) is set to WIDE.
821 Channel Bandwidth A system or FTR key is required to access this field. Use the UP/DOWN
arrow keys to select the Channel Bandwidth. For the 800 MHz
domestic Trunking system configuration, this field specifies the
Channel Bandwidth of the frequencies in the range of 821MHz to 824
MHz.
Note: Strapping fields for announcement group, Fleet ID,
Talkgroup, etc. will be forced to Clear if 12.5 kHz is selected and
the group is Analog.
Phone DTMF Timing Use the UP/DOWN arrow keys to select the set of DTMF timing
parameters for the current personality. Timing may be changed for
Initial Delay, Digit Duration and Interdigit Delay. The radio contains a
table with four sets of values for these parameters. The actual
parameters are entered on the DIALING OPTIONS screen (F4/F3/F4/F9).
Hot DTMF Timing Use the UP/DOWN arrow keys to select the set of DTMF timing
parameters for this personality. Timing may be changed for Initial
Delay, Digit Duration and Interdigit Delay. The radio contains a table
with four sets of values for these parameters. The actual parameters are
entered on the DIALING OPTIONS screen (F4/F3/F4/F9).
Status Aliasing Use the UP/DOWN arrow keys to enable/disable Status Aliasing. This
option allows you to customize the Status number and assign an alias
name to each message (F6). The Status Alias feature must be enabled on
the TRUNKING PERSONALITY screen (F4/F4/F4), and the status
mnemonic (STS) must be assigned on the RADIO WIDE MENU
CONFIGURATION screen (F4/F3/F3/F4).
Message Aliasing Use the UP/DOWN arrow keys to enable/disable Message Aliasing for
this system. This option allows you to customize the Message number
and assign an alias name to each message (F7). The message feature must
be enabled on the TRUNKING PERSONALITY screen (F4/F4/F4), and the
message mnemonic (MSG) must be assigned on the RADIO WIDE MENU
CONFIGURATION screen (F4/F3/F3/F4).
Site Aliasing Use the UP/DOWN arrow keys to enable/disable Site Aliasing. This
option will allow you to customize the site number and to assign an
alias name to each site. AMSS or SmartZone must be added on the
TRUNKING SYSTEM screen (F4/F4/F3) and the SITE mnemonic must be
assigned on the RADIO WIDE MENU CONFIGURATION screen (F4/F3/F3/
F4) for this feature to operate properly.