User`s guide

206
Trunking System
Options
From the MAIN MENU, press F4 twice, F3 and then F9 to access this
screen.
The TRUNKING SYSTEM OPTIONS screen lets you access additional
features and options to further customize the radio configuration to a
customer’s communication needs.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Function Key Descriptions
F3 - PREV SYS Accesses the previous system.
F4 - NEXT SYS Accesses the next system.
F5 - ONE TOUCH This function will be visible only when a radio ordered with the One-Touch
feature has been read. Brings up a screen where you can assign functions
to one-touch features.
F6 - STATUS ALIAS This function will be visible only when a radio containing the SMARTNET
or SmartZone software option has been read and the Status Aliasing field is
set to enabled. Brings up a screen where you can change and view the
parameters associated with Trunking system Status Alias List.
F7 - MSG ALIAS
(Message Alias)
This function will be active only when a radio containing the SMARTNET
or SmartZone software option has been read and the Message Aliasing field
is set to enabled. Brings up a screen where you can assign a number and
name alias to a particular message.
DDCI
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO Model:
..CHANGE/VIEW:TRUNKING:SYSTEM:OPTIONS
System.............1 TRUNKING SYSTEM OPTIONS
------------------------
Tx Power Select...............High Phone DTMF Timing................2
Trunk Repeater Offset.......45 MHz Initial Delay (ms)...........1000
Digit Duration (ms)...........125
Channel Assgn. Type.......Domestic Inter Digit Delay (ms).........75
Splinter Channel..........Disabled Hot DTMF Timing..................2
Rx Modulation......2 Level Receive Initial Delay (ms)...........1000
Digit Duration (ms)...........125
Inter Digit Delay (ms).........75
806 Channel Bandwidth.....25.0 kHz Status Aliasing............Enabled
821 Channel Bandwidth.....25.0 kHz Message Aliasing...........Enabled
Site Aliasing..............Enabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PREV NEXT ONE STATUS MSG SITE EXIT
SYS SYS TOUCH ALIAS ALIAS ALIAS
!
Caution
Caution should be observed when changing
parameters on this screen. System parameter changes
can substantially degrade performance if they are not
made system wide.