User`s guide

204
ASTRO Options From the MAIN MENU, press F4 twice, F3 and then F8 to access this
screen.
This screen is used to change and view parameters that pertain to
ASTRO on a Trunking system. Press Tab to select the desired field, or
press the desired function key (F1 - F10). If a field is highlighted, use
the UP/DOWN arrow keys to select the desired choice or value.
Note: The Data Enable and Data Tx Time fields are valid for Mobiles
only.
Function Key Descriptions
F3 - PREV SYSTEM Accesses the previous system.
F4 - NEXT SYSTEM Accesses the next system.
Field Definitions
System Use the UP/DOWN arrow keys to select the desired Trunking system.
The system number may also be entered directly, or selected using the
function keys.
Note: Refer to the Motorola Radio Catalog Sheets for the
maximum number of systems allowed for this model.
ASTRO Capable System Use the UP/DOWN arrow keys to enable/disable this feature. The
setting in this field determines whether the Trunking system of the
radio will be operating on its ASTRO signalling mode. This field must
be set to Enabled if ASTRO signalling is to be used on the system.
Preamble Length Use the UP/DOWN arrow keys to make your selection to enter a value
directly. This field is the minimum number of ASTRO bit sync
preamble bits sent at the beginning of all ASTRO transmissions from
the radio. The valid range is 0 to 255.
DDCH
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO MOBILE Model:
..CHANGE/VIEW:TRUNKING:SYSTEM:OPTIONS
System.............1 ASTRO TRUNKING SYS. OPTIONS
---------------------------
ASTRO Capable System......Disabled
Preamble Length................120
Auto Power Adaption.......Disabled
Digital Modulator Type........C4FM
High Deviation Tx.........Disabled
Data Enable................Enabled
Data Tx Time.....................5
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PREV NEXT EXIT
SYS SYS