User`s guide

201
Control Channel
(for Other Band
Trunking - UHF/
VHF)
From the MAIN MENU, press F4 twice, F3 and then F6 twice to access
this screen.
This screen is used to enter the Control Channel frequencies for Other
Band Trunking.
DO NOT use the UP/DOWN arrow keys when selecting frequencies.
Note: Receive and Transmit frequencies are required all Other
Band Trunking radios.
Function Key Descriptions
F2 - ADD CHAN
(Add Channel)
Adds a channel.
F3 - PREV SYSTEM Accesses the previous system.
F4 - NEXT SYSTEM Accesses the next system.
F5 - DELETE CHAN
(Delete Channel)
Deletes the current channel. You will be prompted for confirmation
before the channel is actually deleted.
Field Definitions
System Use the UP/DOWN arrow keys to scroll through the available Trunking
systems. Alternately the F3/F4 function keys can be used to navigate
through the available systems.
Tx Freq Enter the Control Channel Transmit frequency directly in MHz.
DO NOT use the UP/DOWN arrow keys when selecting frequencies.
Control channels are used by the radio to send/receive information to
the central trunking repeater system. Up to four control channels are
used for standard trunking operation; up to eight are used for WAC
AMSS.
DDCFF
MOTOROLA Radio Service Software Enter or Scroll to Select System.
ASTRO Model:
...SYSTEM:CHAN ASSIGN:CONTROL CHANNEL
System............ 1
CONTROL CHANNELS
----------------
Number Tx Freq Rx Freq
------ --------- ---------
1 136.00000 136.00000
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE EXIT
CHAN SYS SYS CHAN