User`s guide
200
Field Deļ¬nitions
System Use the UP/DOWN arrow keys to scroll through the available systems.
Alternately the F3/F4 function keys can be used to navigate through
the available systems.
Status Use the UP/DOWN arrow keys to enable this frequency split.
Spacing (kHz) Use the UP/DOWN arrow keys to select the Channel Spacing for this
frequency range. (End Freq - Start Freq) must be evenly divisible by the
channel spacing so the range can be divided into an integer value to
assign the control channel number properly.
Start Enter the Frequency Range Start point directly in MHz. The Start
frequency must be less than the end frequency, and they must be
within the allowed frequency range of the radio.
DO NOT use the UP/DOWN arrow keys.
End Enter the Frequency Range End point directly in MHz. The Start
frequency must be larger than the start frequency, and they must be
within the allowed frequency range of the radio.
!
Caution
This information must match the Central Controller
exactly or the system will not work.