User`s guide

198
Control Channel
(800 MHz)
From the MAIN MENU, press F4 twice, F3 and then F6 to access this
screen.
This screen is used to change and view Control Channel frequencies
for the current system. Press Tab to select the desired field, or press the
desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Function Key Descriptions
F2 - ADD CHAN
(Add Channel)
Adds a channel.
F3 - PREV SYSTEM Accesses the previous system.
F4 - NEXT SYSTEM Accesses the next system.
F5 - DELETE CHAN
(Delete Channel)
Deletes the current channel. You will be prompted for confirmation
before the channel is actually deleted.
Field Definitions
System Use the UP/DOWN arrow keys to scroll through the available Trunking
systems. Alternately the F3/F4 function keys can be used to navigate
through the available systems.
Control Channel A system key or FTR key is required to access this field. The F2 and F5
function keys can be used to add/delete channels respectively. Enter
the Control Channel frequencies directly in MHz. Four Control
Channel frequencies are standard (eight if Wide Area AMSS is enabled
and four for Local AMSS).
DDCF
MOTOROLA Radio Service Software Enter or Scroll to Select System.
ASTRO Model:
...TRUNKING:SYSTEM:CONTROL CHANNEL
System............ 1
CONTROL CHANNELS
----------------
Number Frequency
------ ---------
1 851.0125
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP ADD PREV NEXT DELETE EXIT
CHAN SYS SYS CHAN