User`s guide

197
Dynamic Regrouping Use the UP/DOWN arrow keys to enable/disable this feature for the
current system. A Dynamic Regrouping Talkgroup position (DYN)
must be assigned on the ZONE/SUMMARY screen (F4/F8). Enabling
Dynamic Regrouping will automatically add DYN to the list of
talkgroups on that screen. Dynamic Regrouping allows the dispatcher
to temporarily reassign selected radios operating in separate fleets and/
or talkgroups into a single group.
Note: Only one DYN position may be assigned for each system.
Zone This field will be visible only if Dynamic Regrouping is enabled. Use the UP/
DOWN arrow keys to make your selection or enter a number directly.
This is the zone position used when a radio is dynamically regrouped.
This is used in conjunction with the channel position to determine
which zone/channel talkgroup will be used during Dynamic
Regrouping.
Chan This field will be visible only if Dynamic Regrouping is enabled. Use the UP/
DOWN arrow keys to make your selection or enter a number directly.
This is the channel position used when a radio is dynamically
regrouped. This is used in conjunction with the zone position to
determine which zone/channel talkgroup will be used during
Dynamic Regrouping.
Remote Monitor This field is applicable to Portable radios only. Use the UP/DOWN arrow
keys to enable/disable Radio Trace (remote monitor) for this system.
RM Base Time This field is applicable to Portable radios only. Use the UP/DOWN arrow
keys to select the desired timer value or enter a value directly.
Network ID This field is only displayed for radios equipped with CAI Digital Operation.
This field displays the Network ID for the current system.
Note: This field cannot be edited.