User`s guide

190
Full Spectrum CC Scan Use the UP/DOWN arrows to make your selection. If this field is set to
On, the radio will perform a Full Spectrum Control Channel (CC) scan
when the radio goes out of range of all its programmed control
channel information.
Full Spectrum CC Scan Timer
(sec)
This field will be visible only if Full Spectrum CC Scan is set to On. Use the
UP/DOWN arrows to make your selection or enter a value directly.
This is the amount of time that is available to the radio to perform a
full spectrum CC scan before returning to the normal CC scan. The
valid range of values is 5 to 31 seconds.
RSSI (Received Signal Strength
Indication) OSW Counter
Use the UP/DOWN arrows to make your selection or enter a value
directly. This is the number of OSWs (in 23-ms intervals) for which the
radio must remain inactive on the control channel before a set of RSSI
samples is taken. Valid values range from 60 to 255 ms.
Note: RSSI or Received Signal Strength Indication refers to the
strength of the current signal.
RSSI Acceptable Threshold Use the UP/DOWN arrows to make your selection or enter a value
directly. In the RSSI sampling scheme, RSSI values are separated into
four levels: poor, acceptable, good and excellent. This value specifies
the poor/acceptable boundary. Domain {L: 00 <= L <= FFF}.
RSSI Good Threshold Use the UP/DOWN arrows to make your selection or enter a value
directly. In the RSSI sampling scheme, RSSI values are separated into
four levels: poor, acceptable, good and excellent. This value specifies
the acceptable/good boundary. Domain {L: 00 <= L <= FF}.
RSSI Excellent Threshold Use the UP/DOWN arrows to make your selection or enter a value
directly. In the RSSI sampling scheme, RSSI values are separated into
four levels: poor, acceptable, good and excellent. This value specifies
the good/excellent boundary. Domain {L: 00 <= L <= FF}.
Poor
Acceptable
Good
Excellent
00
L
FFF
Poor
Acceptable
Good
Excellent
00
L
FFF
Poor
Acceptable
Good
Excellent
00
L
FFF