User`s guide

189
SmartZone
Environment
From the MAIN MENU, press F4 twice and then F2 twice to access this
screen.
This screen allows you to change and view parameters for the
SmartZone environment. Press Tab to select the desired field, or press
the desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Field Definitions
Failsoft Inactivity (sec) Use the UP/DOWN arrows to make your selection or enter a value
directly. If a radio remains inactive while operating in Failsoft for the
time specified in this field, the radio will momentarily leave Failsoft
mode and attempt to find a control channel. A value of zero in this
field indicates that the radio will not leave failsoft. The valid range is
0 (zero) to 255 seconds in one-second increments.
Busy Override Delay (sec) Use the UP/DOWN arrows to make your selection or enter a value
directly. This is the time interval (in seconds) during which the user
must depress the PTT button in order for the radio to issue a busy
override signal. The valid range is 2 to 6 seconds in one-second
increments.
Aff. Hold Off (sec) Use the UP/DOWN arrows to make your selection or enter a value
directly. This is the time that the radio should delay before affiliating
to a new site when leaving a site which just incurred a failure. Valid
entries are 1, 3, 7, 15, 31, 63, 127 and 255 seconds.
Busy Override Chirp Ack Use the UP/DOWN arrows to make your selection. If this field is set to
On, the radio will produce a chirping sound after a busy override has
been issued.
Display Site Trunking Use the UP/DOWN arrows to make your selection. If this field is set to
On, the radio will display the Site Trunking message when the user is
locked onto a site that is in Display Site Trunking mode.
DDBB
MOTOROLA Radio Service Software Enter or Scroll to Select Value.
ASTRO Model:
..WIDE OPTIONS:SMART ZONE ENVIRONMENT
SMART ZONE ENVIRONMENT
----------------------
Failsoft Inactivity (sec).....120 Filter Constant K1..............9
Busy Override Delay (sec).......4 Filter Constant K2..............8
Aff. Hold Off (sec)...........255 Filter Constant K3..............8
Busy Override Chirp Ack........ON Filter Threshold Constant T1...14
Display Site Trunking..........ON Filter Threshold Constant T2...1A
Full Spectrum CC Scan.........OFF Filter Threshold Constant T3...20
Full Spectrum CC Scan Timer....10
RSSI OSW Counter...............80
RSSI Acceptable Threshold......34
RSSI Good Threshold............40
RSSI Excellent Threshold.......46
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT