User`s guide

180
Access PL Freq Enter the Access PL (Private-Line) frequency directly in Hz or, if
accessing the frequency entry's alpha-numeric code field, enter the
desired PL code. The UP/DOWN arrow keys may also be used to scroll
through the standard frequencies or codes, all of which are shown
below. The PL code may also be selected by pressing the key
corresponding to its first letter and then scrolling to select the exact
code.
The repeater Access PL specifies the exact PL tone required of incoming
signals for access to be granted to the Vehicular Repeater System—
Expanded Protocol (VRS-EP). A radio within the VRS-EP's area of
operation will be able to gain access to the system only if its signals
carry a PL tone matching the indicated Access PL.
Note: Since the Access PL frequency serves as the receive PL, it
should never be set identical to the VRS-EP's transmit PL,
identified by the selection for Tx PL Freq/Code. An attempt to
exit from the current screen will result in a notice being popped
up if this PL clash is overlooked.
Standard Private-Line Frequencies/Motorola Code are as follows:
Note: A low level hum or buzz in the received audio may be
experienced when PL frequencies above 241.8 (PL codes M7 or
OZ) are used. These frequencies are at the high end of the sub-
audible frequency range and may affect the audio under certain
circumstances. Use of such PL frequencies and/or codes should
be avoided if possible.
Crystal Pull Use the UP/DOWN arrow keys to enable/disable the Vehicular
Repeater System—Expanded Protocol (VRS-EP) Crystal Pull. The
Crystal Pull option makes it possible to reduce the amount of audible
interference encountered during VRS-EP receive operation.
Note: This option should be enabled ONLY if the mobile radio
unmutes unnecessarily during VRS-EP operation.
Freq Code Freq Code Freq Code Freq Code Freq Code
67.0 XZ 91.5 ZZ 123.0 3Z 167.9 6Z 225.7 M4
69.3 WZ 94.8 ZA 127.3 3A 173.8 6A 229.1 9Z
71.9 XA 97.4 ZB 131.8 3B 179.9 6B 233.6 M5
74.4 WA 100.0 1Z 136.5 4Z 186.2 7Z 241.8 M6
77.0 XB 103.5 1A 141.3 4A 192.8 7A 250.3 M7
79.7 WB 107.2 1B 146.2 4B 203.5 M1 254.1 OZ
82.5 YZ 110.9 2Z 151.4 5Z 206.5 8Z
85.4 YA 114.8 2A 156.7 5A 210.7 M2
88.5 YB 118.8 2B 162.2 5B 218.1 M3