User`s guide

166
Auto Light This field will be visible for Portables only. If this feature is enabled, the
display will light up each time a button or key is pressed (except for
PTT). For ASTRO XTS 3000 models, the Auto Rotary Light (F4/F3/F2/
F9) will be automatically adjusted to match your selection for this
Auto Light. This in effect results in synchronized behavior between the
display light and the XTS 3000 Rotary knob lighting. The light will
time out and again automatically shut off based on the setting of the
associated Light Time feature.
Emergency Receive This feature is not compatible with Silent Emergency. To enable the
Emergency Receive feature on this screen, Silent Alarm must be disabled (F4/
F3/F2/F7). Use the UP/DOWN arrow keys to enable/disable the
Emergency Receive Display option. If this feature is enabled, the radio
display will alternate between Emergency Receive and the current
channel when it unmutes on an emergency call. For six-character
display models, “EMGRCV” will be displayed.
Note: Emergency must be enabled on each Conventional MDC
SYSTEMS screen (F4/F6/F4/F3), Conventional ASTRO SYSTEMS
screen (F4/F6/F5/F3), and/or EMERGENCY DATA
CONFIGURATION screen (F4/F4/F4/F8) if your radio supports the
emergency feature.
Display Sys/Sub This field is applicable to Portables only. Use the UP/DOWN arrow keys
to enable Sys/Sub mnemonics to be displayed on the radio menu
instead of Zone/Chan. This feature permits customization of Trunking
applications to minimize user training.
Radio Lock This field is visible for Portables only. Use the UP/DOWN arrow keys to
enable/disable this feature.When this field is enabled, the user will be
required to enter the Radio Lock Password on power-up before using
the radio. For Secure hardware equipped radios, this password must be 6 to
8 characters in length.
Mandatory Password This field is visible for Portables only. Use the UP/DOWN arrow keys to
enable/disable this feature. When this field is enabled, the user must
enter a password each time the radio is turned on. If this option is
disabled, the user may avoid entering a password by changing it to
NULL. (Refer to the Radio Operator’s Manual for details.)
Maximum Password Length This field will be visible for Portables only and if the Radio Lock field on this
screen is set to Enabled. This is the maximum length of a password for
the radio. The radio uses this value only when the password function
is enabled on the menu. Valid entries range from 1 to 8 characters.
Password This field will be visible for Portables only and if the Radio Lock field on this
screen is set to Enabled. Enter the numeric password directly. The
password is the numeric value which must be entered when the radio
is turned on (if the Radio Lock feature on this screen is enabled).