User`s guide

165
feature has been enabled on the ASTRO Conventional Talkgroups
screen (F4/F6/F5/F6). then the Talkgroup Alias will be displayed.
Otherwise, the Talkgroup ID will be displayed.
Note: This field is only visible for radios equipped with CAI
(Common Air Interface) Digital Operation.
Enabling this field will take precedence over the setting of the Display
On Mode Change field on the More Multikey Parameters screen (F4/
F3/F2/F6/F6). The factory default is Disabled.
Alt Display Time (ms) Use the UP/DOWN arrow keys to select the length of time that an
alternate message will be displayed. Valid entries range from 250 to
6250 ms in 250-ms increments.
Temp Msg Display Time (ms) Use the UP/DOWN arrow keys to select the length of time that a
temporary message will be displayed. Valid entries range from 250 to
6250 ms in 250-ms increments.
Display Light Time (sec) This field will be visible for Portables only. Use the UP/DOWN arrow to
specify the Display Light Time and/or the Rotary Light Time (for XTS
3000 models only). You can also enter a value directly.
For ASTRO SABER radios, this is the duration for which the radio
display will be illuminated. For ASTRO XTS 3000 models, the Rotary
Light Time (F4/F3/F2/F9) will be automatically adjusted to match the
selection for Display Light Time.
Valid entries range from five to 60 seconds in five-second increments.
A value of Infinite is also available (that is, the light will remain on
until the Light button is pressed again.