User`s guide

164
Slow Scroll Delay (ms) Use the UP/DOWN arrow keys to select the Slow Scroll Delay, the rate
at which the display will slow scroll through a list before it begins to
fast scroll. Valid entries range from 250 to 6250 ms in 250-ms
increments.
Note: The Slow Scroll Rate should be greater than or equal to
Fast Scroll Rate but less than or equal to 6250 (that is, 250 <= Fast
Scroll Rate <= Slow Scroll Rate <= 6250).
Fast Scroll Delay (ms) Use the UP/DOWN arrow keys to select the Fast Scroll Delay, the rate
at which the display will fast scroll through a list. The radio will first
slow scroll and then fast scroll after the slow scroll count expires. Valid
entries range from 250 to 6250 ms in 250-ms increments.
Note: The Fast Scroll Rate should be greater than or equal to 250
but less than or equal to Slow Scroll Rate (that is, 250 <= Fast
Scroll Rate <= Slow Scroll Rate <= 6250).
Slow Scroll Count Use the UP/DOWN arrow keys to select the number of menus to be
scrolled before the radio switches to the Fast Scroll Rate. Valid entries
range from 0 (zero) to 255.
Codeplug Display This field will be visible for Mobiles only. Use the UP/DOWN arrow keys
to enable/disable this option. If this field is enabled, it implies that at
least one codeplug display exists.
Save Dim State This field will be visible for Mobiles only. Use the UP/DOWN arrow keys
to enable/disable this option. If this field is enabled, the display
brightness setting will to be saved to the EEPROM for use during
power-up initialization.
Display On Mode Change When this field is enabled, the Talkgroup Alias or the Talkgroup ID will
be displayed upon channel change. If the Talkgroup Alias feature has
been enabled on the ASTRO Conventional Talkgroups screen (F4/F6/
F5/F6), then the Talkgroup Alias will be displayed. Otherwise, the
Talkgroup ID will be displayed.
Enabling this field will take precedence over the setting of the Display
On Mode Change field on the More Multikey Parameters screen (F4/
F3/F2/F6/F6). The factory default is Disabled. This field is only visible
for radios equipped with CAI (Common Air Interface) Digital Operation.
Display On Receive When this field is enabled, the Talkgroup Alias or the Talkgroup ID will
be displayed upon unmuting a call. If the Talkgroup Alias feature has
been enabled on the ASTRO Conventional Talkgroups screen (F4/F6/
F5/F6). then the Talkgroup Alias will be displayed. Otherwise, the
Talkgroup ID will be displayed.
Enabling this field will take precedence over the setting of the Display
On Mode Change field on the More Multikey Parameters screen (F4/
F3/F2/F6/F6). The factory default is Disabled.
Note: This field is only visible for radios equipped with CAI
(Common Air Interface) Digital Operation.
Display On Receive When this field is enabled, the Talkgroup Alias or the Talkgroup ID will
be displayed when the PTT button is pressed. If the Talkgroup Alias