User`s guide

160
Designated Tx Mem Use the UP/DOWN arrow keys to select the Designated Transmit
Talkback channel for scan operation. For Conventional scan lists, this
may be the number of the scan member which will serve as the
designated transmit channel during scan operation. Enter the number
of the scan member to have a fixed channel. This channel may NOT be
a receive-only channel. The other options are:
Note: If the channel is a receive-only channel, the radio will issue a
warning to inform you that transmission is not possible.
Zn Use the UP/DOWN arrow keys to select the Zone (or System) for this
member of the scan list. The Zone (System) name from the ZONE/
CHANNEL ASSIGNMENT screen (F4/F8) will be shown to the right.
Chn Use the UP/DOWN arrow keys to select the Channel (or Subfleet) for
this member of the scan list. The Zone (System) name from the ZONE/
CHANNEL ASSIGNMENT screen (F4/F8) will be shown to the right.
Note: If the field displays “???”, an invalid channel condition
exists.
Selected Chan The radio will transmit on the last channel selected by
the user.
Talkback The radio will transmit on the same channel that the
scanner stopped on.