User`s guide

159
Priority 1 Type &
Priority 2 Type
This field is visible only if the Scan Type field is set to Conventional or
Priority Monitor. Use the UP/DOWN arrow keys to select the type of
Priority Scan the radio will use from among the following:
Priority 1 Member This field is visible only when the Priority 1 Type field is set to Fixed or OP/
SEL. Use the UP/DOWN arrow keys to select the Scan member which
has First Priority in scan selection. The channel number may also be
entered directly. When assigned, the Priority 1 Member is typically
Member 1 in the Scan List. Select None for no First Priority channel.
Note: The member selections for Priority 1 Member and Priority
2 Member must be different.
Priority 2 Member This field is visible only when the Priority 2 Type field is set to Fixed or OP/
SEL. Use the UP/DOWN arrow keys to select the Scan Member which
has Second Priority in scan selection. Select None for no Second
Priority channel.
Note: The member selections for Priority 1 Member and Priority
2 Member must be different.
Non-Priority Members Use the UP/DOWN arrow keys to select the non-priority scan type
from among the following:
Selected
Chan
The radio will use the last selected channel as the Priority
Member. First priority and second priority may not both
refer to the selected channel.
Fixed The radio uses a selected member of the scan list, set from
the RSS, as the Priority Channel. This member is fixed and
cannot be programmed from the radio.
OP/SEL
(Operator
Selectable)
The radio uses a selected member of the scan list as the
Priority Channel. The user must select the member of the
scan list to be used as the priority member. This member
can be programmed both from the RSS and the radio.
Disabled No Priority Channel will be allowed.
Fixed The radio uses a selected member of the scan list
configured from the RSS as the non-priority channel. This
member is fixed in that it can be programmed from the RSS but
not from the radio.
OP/SEL
(Operator
Selectable)
The radio uses a selected member of the scan list as the
non-priority member. This member can be programmed from
both the RSS and the radio.