User`s guide

158
Field Definitions
Scan List Use the UP/DOWN arrow keys to select the desired scan list, or use the
F3/F4 function keys to scroll through the lists. Each mode has a
unique scan list. Each Conventional and Trunking personality may
have a unique scan list. The scan lists defined on this screen can be
assigned to the desired personalities on the CONVENTIONAL and
TRUNKING PERSONALITY screens. Lists may be added by pressing the
F2 key and the currently highlighted list can be deleted using the F5
key.
Scan Type Use the UP/DOWN arrow keys to select the type of scan list. The
choices are:
Trunking System ID This field is visible only if the Scan Type field is set to Priority Monitor. Use
the UP/DOWN arrow keys to select the specific Trunking system this
scan list is to use. The system ID will be shown according to system
number.
Note: The Trunking system should be set up on the TRUNKING
SYSTEM screen (F4/F4/F3) before scan list information is entered
since some of these fields depend on Trunking system information.
Trunking System Type This field is read-only and is visible only if the Scan Type field is set to
Priority Monitor. The value in this field is derived from settings in the
TRUNKING SYSTEM screen (F4/F4/F3). Displays the Trunking system
type, either I or II/IIi.
Dynamic Priority (not shown) This field will be visible only if Scan Type is set to Conventional. When this
feature is enabled, the Priority 2 Type field will not be visible. Use the UP/
DOWN arrow keys to enable/disable Dynamic Priority. If this feature
is enabled, the last channel transmitted on will become (and remain)
the Second Priority Channel until a new channel is transmitted on or
scan is disabled. The priority of the First Priority channel will not be
affected.
Conventional May contain only Conventional personalities (up to
15 members).
Talkgroup May contain both Conventional and Trunking
personalities from different systems. May be used for
Trunking Type I or Trunking Type II operation (up to
10 members).
Priority Mon(itor) May contain only Trunking personalities from the
same Type II system (up to 10 members).
If the SMARTNET Type I feature has been purchased, this
type may contain Trunking personalities from the same
Type I system (up to 10 members).