User`s guide

14
RSS Start-Up Procedure Once installation is complete, follow the start-up procedure below:
1. Type C: and press Return to log on to the hard drive.
2. At the C:\ prompt type ASTROP or ASTROM ( depending on which RSS you
installed or which you would like to run ).
This command starts up the RSS. If the software does not start up correctly, you
may hear a tone or see an error message or error code on the display.
Note: If you did not read the accompanying README.TXT file prior
to performing the installation, you may want to do so now. Special
release information contained in this file may be of great value to
you.
File Name Location Description
RUNTIME.EXE \mrss\astro RSS application executable
program.
SMARTRIB.ENC \mrss\astro\srib Used by the RSS to configure your
SmartRIB.
ASTROM.ODB \mrss\astro Used by the RSS to configure
ASTRO Mobile radios.
ASTROP.ODB \mrss\astro Used by the RSS to configure
ASTRO Portable radios.
ASTROM.BAT \ A batch file that launches the
ASTRO Mobile RSS application.
ASTROM.BAT \mrss\astro A batch file that launches the
ASTRO Mobile RSS application.
ASTROP.BAT \ A batch file that launches the
ASTRO Portable RSS application.
ASTROP.BAT \mrss\astro A batch file that launches the
ASTRO Portable RSS application.
ASTMHOPT.MDF \mrss\astro Used by the RSS to configure
ASTRO Mobile radios.
ASTPHOPT.MDF \mrss\astro Used by the RSS to configure
ASTRO Portable radios.
ASTROMBC.ENC \mrss\astro\upgrade Used by the RSS to configure
ASTRO Mobile radios.
ASTROPBC.ENC \mrss\astro\upgrade Used by the RSS to configure
ASTRO Portable radios.