User`s guide
155
Dialing Options At the MAIN MENU, press F4, F3, F4 and then F9 to access this screen.
This screen allows you to modify DTMF phone-wide parameters such
as timing and phone dial operation. Each Conventional system uses
one of these parameter sets which are selected in the DTMF Access
Timing table field on the CONVENTIONAL PERSONALITY PHONE
OPTIONS screen (F4/F6/F3/F8). Each Trunking system uses one of
these parameter sets which are selected in the Phone DTMF Timing
field on the TRUNKING SYSTEM OPTIONS screen (F4/F4/F3/F9).
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is highlighted, use the UP/DOWN arrow keys to
select the desired choice or value.
Field Definitions
Phone Dialing Use the UP/DOWN arrow keys to select the type of Dialing operation
from among the following:
DTMF Digit Hangtime (ms) Use the UP/DOWN arrows to specify the amount of time the radio
continues transmitting after completion of a DTMF digit transmission.
Valid selections are 25 to 6375 ms in 25-ms increments.
DTMF Pause Time (ms) Use the UP/DOWN arrows to select the length of the pause before the
radio begins to transmit DTMF digits. Valid selections are 500 to 4000
ms in 500-ms increments.
DCDI
MOTOROLA Radio Service Software Use UP/DOWN Arrows to Select Choice.
ASTRO Model:
MAIN:CHANGE/VIEW:CONFIG:PHONE:DTMF
DIALING OPTIONS
---------------
Phone Dialing.Immediate Buffered DTMF Pause Time (ms)........1000
DTMF Digit Hangtime (ms)....1000
Num Initial Delay Digit Duration Interdigit Delay
(ms) (ms) (ms)
--- ------------- --------------- ----------------
1 1000 125 75
2 250 150 100
3 350 125 75
4 350 125 75
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP EXIT
Immediate Live Automatically connects the radio to the system
when entering phone mode (live dial). Allows the
user to transmit each number as it is entered.
Immediate Buffered Automatically connects the radio to the system
when entering phone mode (buffered dial).
Delayed Buffered Automatically connects the radio to the system
when PTT is pressed (buffered dial). Allows the user
to enter the phone number in the radio and then
transmit the phone number after pressing PTT.