User`s guide

154
Field Definitions
Access Code Enter the code that will be used to access the phone line. Some
Conventional interconnect systems require a “*” to access the
telephone line. Other systems require a multi-digit access code which
consists of 1 to 4 digits and may or may not contain a “*”. Multi-digit
access codes are used to prevent unauthorized subscriber units from
accessing the interconnect system.
Note: To enter pause (P) from the keypad, press “*” and then
“#”.
Codes can be added and deleted using the F2 and F5 keys respectively.
New codes will be added at the end of the list. A total of 19 unique
Access pairs are allowed.
Deaccess Code Enter a one- to four-digit release code to deaccess the phone line. Some
Conventional interconnect systems require a “#” to release (disconnect) the
telephone line when the user has completed the call.
Release codes are used for system management purposes to improve
system loading by eliminating dead air time after interconnect calls are
completed.
Note: To enter pause (P) from the keypad, press “*” and then
“#”.
Codes can be added and deleted using the F2 and F5 function keys
respectively. New codes will be added to the end of the list. A total of
19 unique Deaccess pairs are allowed.