User`s guide

127
Page Used with the Conventional MDC-1200 Page option and/or the Trunking Page (Call Alert)
option to select a Page ID and send a page.
Phon Used with the Conventional Phone option and/or the Trunking Phone option to select phone
numbers and place a phone call.
Prog Scan program.
Pwr Used to turn on the radio.
The availability of this feature depends on the radio's Control Head. Some of these features CANNOT
be selected on the buttons. Feature position is selectable for W4 and W5 Control Heads.
Rcl Used to recall the last acknowledged status/message and to scroll through the list of previously
set modes until you find the mode you want to change.
The availability of this feature depends on the radio's Control Head. Some of these features CANNOT
be selected on the buttons. Feature position is selectable for W4 and W5 Control Heads. Feature
position is not selectable for W7 and W9 Control Heads.
Resp Call Response to Phone Receive or Call Receive.
Rpgm Used on Trunking modes with the Dynamic Regrouping option to show the current dynamic
regrouping state and to send in a Re-program Request.
Scan Used with the Conventional Scan and/or the Trunking Scan features to select scan lists and
turn scan on/off.
Sec The SECURENET button is used with the SECURENET option to switch between Clear (Off)
and Coded (On) operation.
Sel Select.
Sirn Siren.
Site Used on a Trunking mode with the AMSS option or the SmartZone option to display the
current site and to force a search.
Ste Used with the AMSS option or the SmartZone option to display the lock status and toggle
between lock and unlock status.
Sts Used with the Conventional MDC-1200 Status option and/or the Trunking Status option to
enter or exit the status function.
TGrp This feature is available for radios equipped with CAI Digital Operation only. It is used to switch
from preset to any Talkgroup from the Personality’s Conventional Talkgroup List. When a
Talkgroup from the list is selected, all personalities using that list will also switch to the
Talkgroup.
Tch(1-4) Used to activate the One Touch feature programmed for the selected button.
Unpr This button is not assigned to any feature of the radio. A chirp tone will sound.
Vol Used to adjust the volume of the radio. The availability of this feature depends on the radio's
Control Head. Some of these features CANNOT be selected on the buttons.
VRS Used to activate/deactivate the Vehicular Repeater System, if the radio is so equipped.
Wail Used to toggle wail tone on/off.
Xmit Used to transmit. The radio’s LED will light up to indicate that the radio is transmitting.
XRad Toggles external radio on/off.
Yelp Toggles yelp tone on/off.
ZnDn Used to scroll downward through the zones in the radio, if Zone operation is enabled.
ZnUp Used to advance upward through the zones in the radio, if Zone operation is enabled.