User`s guide

108
Auto Login Use the UP/DOWN arrow keys to enable or disable the radio’s Auto
Login feature. This feature is a sub-feature of the radio lock feature and will
operate only when Radio Lock is enabled. If Auto Login is enabled, the
radio will NOT prompt the user to enter the password on power-up. It
will use the previously entered password to unlock the radio.
Note: The password should have been entered at least once
when the Radio Lock feature is enabled.
Infinite Key Retention Use the UP/DOWN arrow keys to enable/disable this feature. If this
field is set to Enabled, the encryption keys in the radio will be retained
whenever the battery is removed or the radio is re-programmed. If this
field is set to Disabled, the encryption keys will be erased whenever the
battery is removed or the radio is re-programmed.
OTAR Use the UP/DOWN arrow keys to enable/disable the Over-The-Air-
Rekeying (OTAR) feature. Make sure that OTAR Tx is enabled in the
SECURE OPTIONS screen (F4/F6/F3/F6) for each channel where OTAR
operation is desired.
Note: The OTAR OPTIONS screen (F4/F3/F2/F6/F7) can be accessed
only if this field is set to Enabled.
Proper Code Enhancer Use the UP/DOWN arrow keys to enable/disable this feature. When
this field is set to Enabled, the radio will provide optimal and
consistent proper code detect operation in the receiving radios. If this
field is set to Disabled, proper code detect times may be quite long for
radios which are receiving transmissions in a noisy environment.