User`s guide

105
Secure Hardware Equipped This field will not be visible unless a Secure-capable radio has been read. Set
this field to “Yes” ONLY if the current radio is capable of Secure
operation and you would like to enable Secure operation. If not, set
this field to “No”. Setting this field to “Yes” will allow you to access the
RADIO WIDE SECURE OPTIONS screen (F4/F3/F2/F6).
Note: It may take a few seconds for the function key option to
be displayed in the screen’s function key ID area.
!
Caution
Before setting this field to “Yes”, make sure that the
current radio is equipped with Secure hardware. If you
set this field to “Yes” and the radio is NOT Secure-
equipped, the radio may not function properly.