User`s guide

58
Conventional Radio Features
Editing a Name in the List
The Selective Call and Call Alert page features share the same
prestored list of unit IDs.
1 Press and hold the CALL or PAGE softkey to enter the Call ID list.
The Call indicator flashes and a high-pitched tone sounds.
2 Use the navigation keys to locate the list member you want to
change.
OR
Use the numbered keys to go immediately to the location of a
member in the list. For example, press 2 to go to the second
member in the list; press 1 and 0 to go to the tenth member in
the list, and so on.
3 Press and hold the SEL button to select the name-editing
function.
4 Change the characters or numbers using any of the numeric
keys (0 through 9) and special function keys (
*, #) with the
keyapd mic.
Note: The maximum number of characters permitted in a text line
is 14. If you try to add too many characters, you will hear a
low-pitched tone.
To edit, do any or all of the following:
• To enter a character at the blinking cursor, refer to the table
on page 42.
Press the key of the desired character the number of times
shown in the table. For example, to enter the character C,
press the 2 key three times.
• To leave a space in the text, press the up  navigation key to
move the blinking cursor to the next character position, and
then enter the next character.